GrowStream 20

Aeroponic system with twenty nests. Known for its large yields, Growstream is already on the market in Bulgaria. GrowStream perfectly aerates the nutrient solution, delivering oxygen, water and nutrients to the roots in ideal combinations. This system makes plants stronger and more resistant and optimizes their productivity. To each system - instructions and a free set of TA Flora Gro+Bloom+Micro x 1L

• Dimensions: 130/67/44 cm
• Effective capacity: 90 l

Growstream 10

Ten-slot aeroponic system. Known for its large yields, GrowStream is already on the market in Bulgaria. GrowStream perfectly aerates the nutrient solution, delivering oxygen, water and nutrients to the roots in ideal combinations. This system makes plants stronger and more resistant and optimizes their productivity. To each system - instructions and a free set of TA Flora Gro+Bloom+Micro x 1L

• Dimensions: 110/46/55 cm
• Effective capacity: 50 l

System cuttings ( clones ) - 27 . Very good system to develop robust , durable and adaptable plants with strong root system. CuttingBoard can be used by both professionals and beginners , as well as by researchers , teachers and professors of botany. Suitable for rooting of fruit trees , walnut and almond trees, ornamental shrubs , fruits, vegetables and flowers. Each system - instructions and free kit GHE pH Down Dry Dimensions: 66h30h14cm Capacity: 13 L Number of Bays: 27 ATTENTION! Do not leave for a long time already rooted cuttings, because their roots can be twisted and become difficult to remove and unraveling .

TA CultiMate AERO

If you want to try aeroponics at a low cost - this is your system. It can be used for the entire development cycle, or only for one of the phases, or for mother plants. Supplied in 2 versions according to the size of the "mesh pots": 2" (5cm) or 3" (7.5cm).

The set includes:

• Water submersible pump HX-8810 - 220V, 20W; flow 1000L/h; water column 1.95m - with 1 year warranty
• Large tank, allowing easy stabilization of the working solution; enough room for the roots

The system comes with easy and detailed instructions for assembly and use

TA CultiMate Solar

Effective, reliable, easy to use and economical. TA CultiMate Solar systems are based on the first "home" hydroponic system constructed in 1975. Plants are rooted in a layer of expanded clay over a tank of nutrient solution that is pumped up through an "air column" and aerated at the same time. Thus, the oxygen-enriched solution constantly floods the roots, ensuring exceptional growth.

TA CultiMate Solar

Effective, reliable, easy to use and economical. TA CultiMate Solar systems are based on the first "home" hydroponic system constructed in 1975. Plants are rooted in a layer of expanded clay over a tank of nutrient solution that is pumped up through an "air column" and aerated at the same time. Thus, the oxygen-enriched solution constantly floods the roots, ensuring exceptional growth.

The set includes:

Air pump ACO-2201 - 220V, 1.8W; pressure >0.012Mpa, 1.3L/min - with 1 year warranty

Large tank, allowing easy stabilization of the working solution; enough room for the roots

The system comes with easy and detailed instructions for assembly and use

With a minimum of maintenance, it provides fast and stable growth, superior flowering and an excellent harvest

Dimensions: 31x31x37cm

Total volume approximately 15L, effective volume 12L

Made of strong, UV-protected plastic

Wilma hydroponic system 20 is lightweight, comfortable to use and easy to carry hydroponic system for ten plants. Pots of 6,5 , 11 or 18 liters may be placed in each tray 4/8/10/16/20 . Thus plants have sufficient space in which to develop optimally. Wilma growing systems are light and portable , stable , allowing the plants to stand upright even when they are already advanced. Wilma growing systems are specifically designed for the professional gardener ! 20 pc . Plant 1 sq / m Suitable for use with minerlan wool ceramist, coco or soil ! Dimensions: 119 cm length x 117 cm width x 48 cm height 140 liters tank .

The Wilma 10 Pot System is a drip feed system suitable for use with any medium whether it’s soil, coco or clay. Is ideal for beginners and experienced growers alike. Drip feed systems should provide better results than traditional hand watering as the plants have continual access to the nutrients they require. The Wilma Ten Pot System measures 118cm long x 58cm wide x 43cm high and features ten 6.5 litre pots over a 60 litre nutrient tank.

The Wilma 4 Pot System is a versatile drip-feed watering system that can be used with several different growing media and is ideal for beginners and experienced growers alike. The Wilma should provide better results than hand watering in traditional pots and for the best results we recommend using clay pebbles. The four-pot system uses a 30 litre tank with four 11 litre pots on top, although it is possible to use Air Pots instead as the three litre versions will fit right in. The Wilma Four-Pot System measures 69cm long x 58cm wide x 43cm high (when used with the standard pots).

Cornwall Ozonizer 7W 200mg/h neutralises odors and gases, microorganisms and pests

• Ozone output: 200 mg/h
• Suitable to use in a room up to 15m²
• Working time: up to 30min every hour
• Voltage: 220-240V AC 50 Hz
• Maximum load: 16A 3600W (noninductive)

Ona Gel Fresh Linen 4L not only neutralizes undesired odors of any kind, but eliminates them completely - permanently and efficiently. Its patented natural essential oil formula makes it the best and most selling product on the market!

• suitable for the home, kitchen, car, garbage can area etc.
• antibacterial, antifungal and antiseptic

Ona Gel Pro 4L not only neutralizes undesired odors of any kind, but eliminates them completely - permanently and efficiently. Its patented natural essential oil formula makes it the best and most selling product on the market!

• suitable for the home, kitchen, car, garbage can area etc.
• antibacterial, antifungal and antiseptic

Ona Gel Polar Crystal 732g not only neutralizes undesired odors of any kind, but eliminates them completely - permanently and efficiently. Its patented natural essential oil formula makes it the best and most selling product on the market!

• suitable for the home, kitchen, car, garbage can area etc.
• antibacterial, antifungal and antiseptic

Ona Gel Apple Crumble 1L not only neutralizes undesired odors of any kind, but eliminates them completely - permanently and efficiently. Its patented natural essential oil formula makes it the best and most selling product on the market!

• suitable for the home, kitchen, car, garbage can area etc.
• antibacterial, antifungal and antiseptic

Ona Block Apple Crumble 170g neutralizes and removes completely undesirable odors of any kind. The product is completely safe and non-toxic, as it is a blend of natural essential oils.

• suitable for: attics, closets, cars, gym bags, kitchens, cupboards, garbage cans etc.
• antibacterial, antifungal and antiseptic 
• harmless to humans, pets and plants
• very compact (8x7cm)

Ona Block Fresh Linen 170g neutralizes and removes completely undesirable odors of any kind. The product is completely safe and non-toxic, as it is a blend of natural essential oils.

• suitable for: attics, closets, cars, gym bags, kitchens, cupboards, garbage cans etc.
• antibacterial, antifungal and antiseptic
• harmless to humans, pets and plants
• very compact (8x7cm)

Ona Block Polar Crystal 170g neutralizes and removes completely undesirable odors of any kind. The product is completely safe and non-toxic, as it is a blend of natural essential oils.

• suitable for: attics, closets, cars, gym bags, kitchens, cupboards, garbage cans etc.
• antibacterial, antifungal and antiseptic
• harmless to humans, pets and plants
• very compact (8x7cm)

Ona Block Pro 170g neutralizes and removes completely undesirable odors of any kind. The product is completely safe and non-toxic, as it is a blend of natural essential oils.

• suitable for: attics, closets, cars, gym bags, kitchens, cupboards, garbage cans etc.
• antibacterial, antifungal and antiseptic
• harmless to humans, pets and plants
• very compact (8x7cm)

PLANTiT Water Timer is designed to connect to a tap , but can also be used for gravity irrigation from a canister or tank. Programming the timer is done in just 2 easy steps - turn the Run Time knob for your desired watering time and the Frequency knob for your desired time between waterings. Then connect to the irrigation outlet pipe and the timer will do the rest.

• Designed for connection to a tap
• The protective cover makes it completely waterproof
• Powered by two 1.5V AAA batteries (not included), which can last an entire season without needing to be replaced
• Automatic shut-off valve for when the battery is low and a program delay button for when you need to do plant maintenance and don't want to water
• Comes with a set of fittings and a built-in filter

Cornwall power control dimmer

Technical Specifications:

• Power: 280W
• Voltage: 230V
• Frequency: 50Hz
• Fuse specification: 1.6A

How to use the Dimmer:

1. Plug the dimmer into the mains.
2. Connect the device to the dimmer.
3. The dimmer’s light will show if the power is on.
4. Adjust the power with the selection wheel.

Cornwall Humidity Controller is the ideal device to provide your crop with the optimal humidity. Connect your humidifier or extractor and set the desired humidity. The controller will take care of the rest.

• Voltage: 230V AC / 50HZ
• Maximum load: 16A 3680W
• Inductive Load: 2A 460W
• Operational Temperature: 5ºC - 40°C
• Storage Temperature: -10°C - 50°C
• Humidity Control Range: 20% - 90%
• Precision: ±5%
• Measuring Interval: 10 sec
• Temperature range: 0°C - 40°C / 32°F - 104°F

Cornwall Temperature Controller, ideal to stabilize the crop’s temperature. Suitable for air conditioning or heating devices, depending on the chosen function.

• Voltage: 230V AC/50HZ
• Total load: 16A 3680W 
• Inductive load: 2A 460W
• Operating temperature: 0ºC - 40°C
• Storage temperature: -10°C - 50°C
• Temperature range: 5°C - 30°C / 40°F - 85°F
• Precision: ±1°C / ±3°F 
• Measuring interval: 10 sec

Temperature, minimum speed and negative pressure controller.

Sizes and technical data:

• Controller: W80xH80xL130mm
• Case: W150xH110xL170mm
• Designed for: 2A / 2x200W / TRIAC 2x16A
• Voltage: 230V / 50HZ
• Digital sensor 5V measures temperatures from –55°C to +125°C ( –67°F to +257°F )
• 0.5°C accuracy from –10°C to +85°C
• Protection class: IP54

Settings range:

• Temperature: 20C° to 30C°
• Minimum speed: off, 20% to 100%
• Negative pressure: 100% to 50%

Temperature, minimum-maximum speed controller with hysteresis setting.

Sizes and technical data:

• Controller: W80xH80xL130mm
• Case: W150xH110xL170mm
• Designed for: 1x200W / TRIAC 1x16A
• Voltage: 230V 50HZ
• Digital sensor 5V Measures temperatures from –55°C to +125°C ( –67°F to +257°F )
• 0.5°C accuracy from –10°C to +85°C
• Protection class: IP54

Settings range:

• Temperature: 20C° to 30C°
• Minimum speed: off, 20% to 100%
• Maximum speed: 100% to 50%
• Hysteresis: 1C° to 8C°

Temperature, Minimum speed, Humidity and Negative Pressure controller.

Sizes and technical data:

• Controller: W80xH80xL130mm
• Case: W150xH110xL170mm
• Designed for: 2A / 2x200W / TRIAC 2x16A
• Voltage: 230V / 50HZ
• Digital sensor 5V measures temperatures from –55°C to +125°C ( –67°F to +257°F )
• 0.5°C accuracy from –10°C to +85°C
• Humidity accuracy ±4.5%RH
• Protection class: IP54

Settings range:

• Temperature: 20C° to 30C°
• Humidity: 30% to 100%
• Minimum speed: off, 20% to 100%
• Negative pressure: 100% to 50%

Timer box 4h16A applying a voltage relays for ballasts 12x600W or 12x400W.V time off powered by 2000W heater. Case: WxHxD = 180x130x60mm Timer box: WxHxD = 230x150x70mm 1 Pole incl. connector 16A (EU) 4x600W 1 Pole incl. connector 10A (CH) 3x600W, 3 Pole excl. connector 9x600W Volt: 230V / 50Hz 24h timer with 36h power reserve 30min. setting Relays: 4x16A 230V Protection class: IP40

Timer box 4h16A applying a voltage relays for ballasts 12x600W or 12x400W Sizes and technical data: Case: WxHxD = 180x130x60mm Timer box: WxHxD = 230x150x70mm 1 Pole incl. connector 16A (EU) 4x600W 1 Pole incl. connector 10A (CH) 3x600W, 3 Pole excl. connector 9x600W Volt: 230V / 50Hz 24h timer with 36h power reserve 30min. setting Relays: 4x16A 230V Protection class: IP40

Control panel for controlling the working process of HPS (sodium) and MH (metal-halide lamps) with a timer controlling the switching on and off of the lamps. On models with a heater output, the unit turns on when the lamps are turned off for maximum energy efficiency. The maximum permissible power of the device is up to 2000W.

Control panel for controlling the working process of HPS (sodium) and MH (metal-halide lamps) with a timer controlling the switching on and off of the lamps. On models with a heater output, the unit turns on when the lamps are turned off for maximum energy efficiency. The maximum permissible power of the device is up to 2000W.

Control panel for controlling the working process of HPS (sodium) and MH (metal-halide lamps) with a timer controlling the switching on and off of the lamps. On models with a heater output, the unit turns on when the lamps are turned off for maximum energy efficiency. The maximum permissible power of the device is up to 2000W.

Milwaukee 12880 µS/cm Conductivity Calibration Solution 20ml is a buffered solution / calibration fluid for instruments measuring electrical conductivity (EC).

• accuracy: ±0.01 EC
• value: 12880 µS/cm at 25°C
• volume: 20 ml
• single use

Milwaukee Electrode Rinse Solution 20ml is ideal for rinsing your electrode between different calibration fluids, thus avoiding mixing them. This rinse solution is also ideal for removing any build-up on the probe or cap caused by evaporation of the storage solution. Although the build-up of this build-up is normal, it must be removed before measuring or calibrating !

• Does not replace cleaning or storage solutions!
• Prolongs life on your electrode!
• single use

Milwaukee pH 7.01 20ml buffered solution / calibration fluid for pH meters.

• accuracy: ±0.01 pH
• value: 7.01 pH at 25°C
• volume: 20 ml
• single use

Milwaukee pH 4.01 20ml buffered solution / calibration fluid for pH meters.

• accuracy: ±0.01 pH
• value: 4.01 pH at 25°C
• volume: 20 ml
• single use

Milwaukee 1413 µS/cm Conductivity Calibration Solution 20ml is a buffered solution / calibration fluid for instruments measuring electrical conductivity (EC).

• accuracy: ±0.01 EC
• value: 1413 µS/cm at 25°C
• volume: 20 ml
• single use

VitaLink ESSENTIALS CF Calibration Fluid 2.8 µS/cm 250ml is a buffered solution / calibration fluid for devices measuring electrical conductivity (EC).

• accuracy: ±0.01 EC
• value: 2.8 µS/cm at 25°C
• volume: 250 ml
• for multiple calibration

Reduce the pH-level during the bloom phase.

• High concentration
• Designed for the bloom phase
• Minimal use

Reduce the pH level during the grow phase.

• High concentration 38% HNO₃ / Nitric Acid
• Designed for the grow phase
• Minimal use

Reduce your nutrient pH sollution with CELLMAX pH- Grow. Developped for the growth phase.

• 38% HNO₃ / Nitric Acid

Reduce your nutrient pH sollution with CELLMAX pH- Bloom. Developped for the bloom phase.

• 59% H₃PO₄ / Phosphoric Acid

Raise your nutrient pH sollution with CELLMAX pH+. 

• 12% KOH / Potassium Hydroxide
• 28.2% K₂O / Potassium Oxide

CANNA pH- Grow can be used to reduce the pH* value of the nutrient solution during the vegetative period.

• 17% HCl / Hydrochloric Acid

CANNA pH- Grow can be used to reduce the pH* value of the nutrient solution during the flowering period.

• 59% H₃PO₄ / Phosphoric Acid

In order to adjust the pH* upwards there is CANNA pH+. This product is suitable for both the growth and the flowering phase.

• 20% KOH / Potassium Hydroxide

Take quick measurements of the EC and temperature of your solution with the Bluelab Conductivity pen!

• completely waterproof
• simple one-point calibration
• 1 year warranty
• Auto-off function to extend battery life
• 1 x AAA alkaline battery (included)
• EC measurement range: 0.0 - 10.0
• accuracy: ± 0.1 at 25°C

Take quick measurements of the pH and temperature of your solution with the Bluelab pH pen !

• completely waterproof
• simple two-point calibration
• 1 year warranty
• Auto-off function to extend battery life
• 1 x AAA alkaline battery (included)
• pH measurement range: 0.0 - 14.0
• accuracy: ± 0.1 at 25°C

The Bluelab Nutrient Meter is designed for hydroponic crops that require a higher than normal level of EC or CF (electrical conductivity or nutrient solution concentration) during their growing cycle.

• completely waterproof
• The length of 40.7cm allows for convenient mixing of the nutrient solution directly in the tank!
• Does not require calibration (factory calibrated)!
• Provides measurements in EC , CF, ppm700 and ppm500 scales
• Auto on/off function
• 5 years warranty
• EC measurement range: 0.2 - 3.6
• EC measurement accuracy: ± 0.1 at 25°C

Bluelab Guardian Monitor allows you simply and effectively to measure pH, conductivity and temperature of the nutrition solution in your reservoir.

• Replaceable Bluelab pH probe included
• Bluelab pH probe cable length: 2m
• No calibration required for the conductivity/temperature probe (factory calibrated)
• Waterproof design
• 2 year warantee for the device
• 6 month warantee for Bluelab pH probe

Measurement range:

• pH: 0.0 - 14.0
• EC: 0.0 - 5.0
• CF: 0 - 50
• ppm 500 (EC x 500): 0 - 2500TDS
• ppm 700 (EC x 700): 0 - 3500ppm
• temperature: 0 - 50°C / 32 - 122°F

Accuracy (at 25°C / 77°F):

• pH: ± 0.1
• EC: ± 0.1
• CF: ± 0.1
• ppm 500 (EC x 500): ± 50TDS
• ppm 700 (EC x 700): ± 70ppm 
• temperature: ±1°C / ± 2°F

ROOT!T Thermostat for Heat Mat is an electronic device that allows complete control over the temperature in the root zone during propagation. By switching the heat mats on and off, it maintains the precisely set desired temperature (10-30ºC). It is compatible with all ROOT!T Heat Mats.

• Maintain optimum temperatures for your plants!
• Easy plug-in operation!
• Easy to use and control!
• Sensor cable length: 1.8m.
• max. load: 1000W / 4.3A

ROOT!T Large Heat Mat evenly warms the root zone, improving germination and rooting. Maintaining a constant temperature is a key factor to success in the early stages, when young plants are most fragile and vulnerable.

• Dimensions W/L: 40x120cm
• Accelerates seed germination or rooting of cuttings with several days.
• Heats the root zone by 5.5-11˚C above ambient temperature.
• Completely waterproof, scratch resistant, durable.
• To set the desired temperature exactly, use with ROOT!T Thermostat for Heat Mat.

ROOT!T Medium Heat Mat evenly warms the root zone, improving germination and rooting. Maintaining a constant temperature is a key factor to success in the early stages, when young plants are most fragile and vulnerable.

• Dimensions W/L: 40x60cm
• Accelerates seed germination or rooting of cuttings with several days.
• Heats the root zone by 5.5-11˚C above ambient temperature.
• Completely waterproof, scratch resistant, durable.
• To set the desired temperature exactly, use with ROOT!T Thermostat for Heat Mat.

ROOT!T Small Heat Mat evenly warms the root zone, improving germination and rooting. Maintaining a constant temperature is a key factor to success in the early stages, when young plants are most fragile and vulnerable.

• Dimensions W/L: 25x35cm
• Accelerates seed germination or rooting of cuttings with several days.
• Heats the root zone by 5.5-11˚C above ambient temperature.
• Completely waterproof, scratch resistant, durable.
• To set the desired temperature exactly, use with ROOT!T Thermostat for Heat Mat.

Glass House Propagator 64 is a propagator made of high-quality hard plastic, suitable for germination, small plants or cuttings.

• size: 59x39x24cm.
• solid, durable and waterproof polypropylene tray
• transparent, impact-resistant polystyrene cover for maximum light permeability
• sliding vents for easy humidity control

Mammoth Pro 120 x 120 x 200cm / 600W is a complete kit for growing plants indoors. The kit includes:

• grow tent Mammoth Pro 120 1pc 
• bulb LUMii BLACK 600W HPS 1pc
• magnetic ballast Hortilight 600W 1pc
• open hammered reflector Stucco 1pc
• analog timer LUMii 1pc
• extraction fan CAN 350m3/h 1pc
• active carbon filter Can-Lite 425m3/h 1pc
• air duct Combiconnect ⌀ 127mm 3m
• duct clamp ⌀ 60 - 135mm 3pcs
• circulating clip fan Garden Highpro 15cm 1pc
• thermo-hygrometer Garden Highpro 1pc
• hangers Rope Ratchet 1pc
• round pot 9.5L 9pcs

Note:

1. The photo is illustrative!
2. The kit is exemplary and can be customized according to the client`s needs.

Mammoth Pro 90 x 90 x 180cm / 400W is a complete kit for growing plants indoors. The kit includes:

• grow tent Mammoth Pro 90 1pc 
• bulb Sylvania GroLux SHP-TS 400W 1pc
• magnetic ballast Electrostart 400W 1pc
• open hammered reflector Stucco 1pc
• analog timer LUMii 1pc
• extraction fan with two speeds Garden Highpro 220-280m3/h 1pc
• active carbon filter Can-Lite 300m3/h 1pc
• air duct Combiconnect ⌀ 127mm 3m
• duct clamp ⌀ 60-135mm 3pcs
• circulating clip fan Garden Highpro 15cm 1pc
• thermo-hygrometer Garden Highpro 1pc
• hangers Rope Ratchet 1pc
• round pot 5L 9pcs

Note:

1. The photo is illustrative!
2. The kit is exemplary and can be customized according to the client`s needs.

Mammoth Pro 300 x 300 x 200cm / 6 x 600W is a complete kit for growing plants indoors. The kit includes:

• grow tent Mammoth Pro 300 1pc
• bulb LUMii BLACK 600W HPS 6pcs 
• magnetic ballast Hortilight 600W 6pcs 
• open hammered reflector Stucco 6pcs  
• G-Systems Timer Box 6x600W 1pc
• outtake box fan Torin 2000m3/h 1pc
• intake box fan Torin 1500m3/h 1pc
• active carbon filter CAN LITE 2000m3/h 1pc
• GSE Temp, Min Speed and Neg Pressure Controller 1pc
• air duct Combiconnect ⌀ 203mm 3m
• metal flange 200mm for box fan 4pcs 
• duct clamp  ⌀ 60 - 270mm 5pcs 
• circulating clip fan Cornwall 20cm 2pcs
• circulating fan Cornwall Multifan 35W 2pcs
• two-point thermo-hygrometer HTC-2 1pc
• hangers Rope Ratchet 4pcs
• round pot 15L 36pcs

Note:

1. The photo is illustrative!
2. The kit is exemplary and can be customized according to the client`s needs.

Cultibox Scrog Net for plants` support. Mesh size: 120, 100 or 80cm.  

• Dimensions: 300x150x200cm.
• Suitable Lighting: 2 x HPS 1000W
• Advisable Ventilation: min. 780m³/h - max. 1000m³/h

• Dimensions: 240x120x200cm.
• Suitable Lighting: 2 x HPS 600W
• Advisable Ventilation: min. 425m³/h - max. 600m³/h

• Dimensions: 300x300x200cm.
• Suitable Lighting: 4 x HPS 1000W
• Advisable Ventilation: min. 1100m³/h - max. 1250m³/h

• Dimensions: 240x240x200cm.
• Suitable Lighting: 4 x HPS 600W
• Advisable Ventilation: min. 780m³/h - max. 1000m³/h

• Dimensions: 120x120x200cm.
• Suitable Lighting: 1 x HPS 1000W
• Advisable Ventilation: min. 250m³/h - max. 380m³/h

Secret Jardin DR150 is a growbox from the elite Dark Room series which is designed for plants with height up to 180cm. The tent comes with two DF25 flanges for connecting with the intake and outtake fans and all the accessories needed to install a complete ventilation system.

• dimensions W/D/H: 150 x 150 x 217cm
• steel poles: ⌀ 25mm
• full 360º plant access
• zippers: 100% lightproof

If you intend to use the spray for watering your plants, you must provide holes where they will out the the excess of food solutions, these holes can make at the bottom of your pots, plates or cubes. Danish trays are curved deeply drains troughs that help the draining ofnutritional solutions away from your plants so the plant will not be permanently in water.There are three sizes of Danish trays, each also includes drainage channels. Werecommend using the thread with a diameter of 25 mm tubes with the same fitting, to be able to direct the waste tank. When you use threaded fittings 25mm, use PTFE tape ensure good connection. Danishtrays should be placed on a stable shelf or stand to be used properly.

If you intend to use the spray for watering your plants, you must provide holes where they will out the the excess of food solutions, these holes can make at the bottom of your pots, plates or cubes. Danish trays are curved deeply drains troughs that help the draining ofnutritional solutions away from your plants so the plant will not be permanently in water.There are three sizes of Danish trays, each also includes drainage channels. Werecommend using the thread with a diameter of 25 mm tubes with the same fitting, to be able to direct the waste tank. When you use threaded fittings 25mm, use PTFE tape ensure good connection. Danishtrays should be placed on a stable shelf or stand to be used properly.

If you intend to use the spray for watering your plants, you must provide holes where they will out the the excess of food solutions, these holes can make at the bottom of your pots, plates or cubes. Danish trays are curved deeply drains troughs that help the draining ofnutritional solutions away from your plants so the plant will not be permanently in water.There are three sizes of Danish trays, each also includes drainage channels. Werecommend using the thread with a diameter of 25 mm tubes with the same fitting, to be able to direct the waste tank. When you use threaded fittings 25mm, use PTFE tape ensure good connection. Danishtrays should be placed on a stable shelf or stand to be used properly.

Air-Pot® 3L is ideal for clones and young plants. Air - Pot® are "breathable" containers that ensure plants will develop strong fibrous roots without circling. And every gardener, from the hobbyist to the professional, knows that healthy roots mean faster growth and better nutrient and water absorption. 

• 60% faster growth and up to 75% more CO₂ absorbed
• diameter: ⌀ 195mm
• height: 220mm
• material: recycled polyethylene

Air-Pot® 1L is ideal for planting seeds. Air - Pot® are "breathable" containers that ensure plants will develop strong fibrous roots without circling. And every gardener, from the hobbyist to the professional, knows that healthy roots mean faster growth and better nutrient and water absorption.

• 60% faster growth and up to 75% more CO₂ absorbed 
• diameter: ⌀ 111mm
• height: 150mm
• material: recycled polyethylene

The AutoPot 400 Litre FlexiTank revolutionises water storage, it is everything you need in one compact box. It requires no tools for assembly, reduces storage and shipping costs and takes minutes to assemble. It really couldn’t be simpler. Unlike other waterbutts and barrels, the AutoPot FlexiTank can be stored away when not used, can fit where other tanks cannot go and is adaptable in ways standard tanks are not.

The AutoPot 225 Litre FlexiTank revolutionises water storage, it is everything you need in one compact box. It requires no tools for assembly, reduces storage and shipping costs and takes minutes to assemble. It really couldn’t be simpler. Unlike other waterbutts and barrels, the AutoPot FlexiTank can be stored away when not used, can fit where other tanks cannot go and is adaptable in ways standard tanks are not.

The AutoPot 100 Litre FlexiTank revolutionises water storage, it is everything you need in one compact box. It requires no tools for assembly, reduces storage and shipping costs and takes minutes to assemble. It really couldn’t be simpler. Unlike other waterbutts and barrels, the AutoPot FlexiTank can be stored away when not used, can fit where other tanks cannot go and is adaptable in ways standard tanks are not.

​

The AQUAbox Straight is designed to water and feed plants of all types and sizes that are grown directly in the soil. Positioned directly into the ground the AQUAbox Straight is ideal for watering narrow raised beds. Alternatively, it may be used in a tray to water a conventional grow bag.
AQUAbox Straight is attached to single capillary wick that distributes water under the soil, across an area of up to 4 square feet. With an AQUAvalve at its core, the AQUAbox Straight draws on the water supply (water reservoir) as required by the plants, ensuring an incredibly efficient use of water. The roots of the plants instinctively head towards the water source, attaching themselves to the capillary wicks below the soil level.

A key component in the easy2GO kit. The AQUAvalve cover, when used in conjunction with the AQUAvalve allows the grower to create their own basic, but very effective, hobby system. 

The AQUAvalve is supplied with all AutoPot Watering Systems. Once connected to the water supply the AQUAvalve will control the flow of water to the plants, by simple gravity pressure from a tank or water butt, no pumps, mains water pressure, electricity or timers are required. Once connected to a tank the AQUAvalve will open and allow water to fill the tray to a preset level of 20mm. The AQUAvalve will not refill the tray until all the water has been used.
The AQUAvalve is at the heart of all our watering systems and ensures our systems offer low maintenance, are easily extendable, there is no more hand watering and can water and feed crops whether ornamental or edible all year round. Due to the capacity of the AQUAvalve AutoPot are now market leaders in irrigation whether for domestic gardening, commercial horticulture or hydroponics. The AQUAvalve is a simple but very effective watering device promoting phenomenal growth and maximum yields.

The AutoPot easy2grow Extention kit 8.5 Liter includes:

• 2x 8.5L pots
• 2x Marix discs – the Marix discs are placed inside each of the pots to prevent soil/compost from leaving the pots
• 2x PotSocks – the RCD’s are placed in the tray under each pot, gold face up. The RCD’s will prevent roots from leaving the pots and discourage them from heading towards the AQUAvalve.
• 1x single AQUAvalve with the 2Pot Extension Kit is placed in between the pots.
• 1x 1m of pipe
• 1x 6mm Tee for easy connection to the easy2grow Kit or existing systems.

The AutoPot 1Pot XL System is extremely versatile and can be used for a wide range of plant types and sizes. Seasonal flowering plants and perennial shrubs thrive and produce an abundance of blooms and foliage because of the unique action of the AQUAvalve, which is designed to allow the plant to go through a wet & dry cycle.

All AutoPot products require:

• NO POWER
• NO PUMPS
• NO MAINS WATER PRESSURE
• NO TIMERS

Gravity pressure is all that is needed  from a tank or water barrel. The systems are undoubtedly some of the simplest to use and can be left unattended for weeks due to the capability of the AQUAvalve to deliver all that is required by the plant. 

The AutoPot 1Pot modulе is extremely versatile and can be used for a wide range of plant types and sizes. The AutoPot 1Pot modulе is easily extended so many pots can be linked to a single tank.

All AutoPot products require:

• NO POWER
• NO PUMPS
• NO MAINS WATER PRESSURE
• NO TIMERS

Gravity pressure is all that is needed  from a tank or water barrel. The systems are undoubtedly some of the simplest to use and can be left unattended for weeks due to the capability of the AQUAvalve to deliver all that is required by the plant. The AutoPot 1Pot modulеs can be connected to build even larger systems. See the advice tab for more information or download the 1pot System guide*.

Square pot made of UV-protected plastic with holes on the bottom.

• Capacity: 11L
• Size: 251x251x257mm
• Weight: 0.320kg
• Material: polypropylene
• Made in Italy.

Saucer made of UV-protected plastic for square pot.

• Size: 229x229x30mm
• Weight: 0.078kg
• Material: polypropylene
• Made in Italy.

Square pot made of UV-protected plastic with holes on the bottom.

• Capacity: 9L
• Size: 226x226x238mm
• Weight: 0.250kg
• Material: polypropylene
• Made in Italy.

Saucer made of UV-protected plastic for square pot.

• Size: 210x210x30mm
• Weight: 0.070kg
• Material: polypropylene
• Made in Italy.

Square pot made of UV-protected plastic with holes on the bottom.

• Capacity: 6L
• Size: 210x210x220mm
• Weight: 0.200kg
• Material: polypropylene
• Made in Italy.

Saucer made of UV-protected plastic for square pot.

• Size: 190x190x30mm
• Weight: 0.053kg
• Material: polypropylene
• Made in Italy.

Square pot made of UV-protected plastic with holes on the bottom.

• Capacity: 5L
• Size: 185x185x194mm
• Weight: 0.160kg
• Material: polypropylene
• Made in Italy.

Saucer made of UV-protected plastic for square pot.

• Size: 144x144x26mm
• Weight: 0.034kg
• Material: polypropylene
• Made in Italy.

Square pot made of UV-protected plastic with holes on the bottom.

• Capacity: 2L
• Size: 140x140x150mm
• Weight: 0.100kg
• Material: polypropylene
• Made in Italy.

Designed to meet the needs of large manufacturers, a giant version of the Trimpro Automatik is now available. The Trimpro XL has a larger capacity and a performance ratio 5 times better than its predecessor. The blade height is adjustable to enable precise cutting distance and a single motor regulator adjusts the swirl speed.

• Low noise, efficient, high quality
• Box Dimensions: 88 x 88 x 79 cm
• Assembled: 99.1 x 91.4 x 129.5 cm

Let the TRIMPRO AUTOMATIK do the job for you. Equipped with a powerful three phase motor mated with a variable speed dimmer, height adjustable four (4) blades assembly and a circular hermetic structure that creates a whirlwind effect, the Trimpro Automatik is the fastest and safest way to trim your plants.

We present to you the Tumble Trimmer 45 cm - a revolutionary device that offers fast and accurate trimming of plants. It is designed to optimize your operation while reducing the risk of plant damage.

Leef Kleen Precision Scissors with Straight Tip for more comfortable use.

• 100% inox 
• extra sharp blades
• 100% prime rubber